Engineering Compliance & Verification
Power Quality Equipment Certifications & Compliance
Fully Certified Active Harmonic Filters & SVG Systems Meeting Global Safety, EMC, and Grid Interconnection Standards.
Since 1994, Shanghai iKonMac Technology Co., Ltd. has delivered standardized, audit-ready power quality equipment to critical utility, industrial, and infrastructure projects across 50+ countries.
Compliance Dossier Verification
Audit-Ready Credentials at a Glance
Document Registry: IKM-CER-GLOBAL-2024. Accreditation bodies CNAS / CMA / Notified Bodies. Factory audit baseline ISO 9001 / 14001 / 45001 with regional grid clearance across North America, EU, APAC, and MEA.
ISO 9001
ISO 9001:2015 System
Certified quality management across design, production, and FAT.
CE Mark
CE LVD & EMC Directives
Harmonized EU safety compliance under EN 62477-1 and EN 61000.
CNAS / CMA
National Lab Type Tests
Independent laboratory test reports certified by CNAS and CMA.
Grid Codes
Grid Interconnection Codes
Utility interconnection compliance verified across 50+ countries.
Full-Spectrum ISO Compliance
Verified ISO Management System Standards
Backed by 200+ specialized personnel and an integrated quality framework, iKonMac embeds audited ISO standards across every stage of engineering and production, delivering over 3.5 million Amperes and kVAR of industrial power electronics annually with full traceability.
Audited & Active
Quality Management
ISO 9001:2015
ISO 9001 Certified Harmonic Filter Quality System
R&D, precision manufacturing, assembly, and technical services for Active Harmonic Filters (AHF), Static Var Generators (SVG), and silicon carbide power electronics.
Three-year validity term with validated annual surveillance audit compliance records.
Issuing Authority
Accredited CQC / CNAS Third-Party Certification Body
Registration ID
00121Q3xxxxR0M/3100
Audit Cycle & Validity: surveillance complete
Official Registry Details
Verification Database: CNCA National Certification & Accreditation Public Query Portal
Manufacturing Facility: iKonMac Clean Assembly & Aging Test Facilities, Lines 1-4
Audit Status: Surveillance Cycle Complete with Zero Critical Non-Conformances
Audited & Active
Environmental Management
ISO 14001:2015
ISO 14001 Power Electronics Factory
Low-carbon manufacturing processes for power electronics, automated lead-free wave soldering, closed-loop waste gas handling, and industrial recycling.
Complies with RoHS hazardous substance restrictions and sustainable industrial lifecycle regulations.
Issuing Authority
CNCA Authorized Environmental Certification Registrar
Registration ID
00121E2xxxxR0M/3100
Environmental Performance verified
Official Registry Details
Verification Database: State Environmental Protection Assessment Catalog
Emissions Standard: Low-VOC Clean-Room Extraction & Electrostatic Air Filtration
Hazardous Substance Control: 100% Lead-Free Solder & Recyclable Packaging Verification
Audited & Active
Occupational Health & Safety
ISO 45001:2018
ISO 45001 Electrical Engineering Safety
Workplace safety protocols covering low-voltage and high-voltage SVG power quality assembly lines, automated full-load burn-in bays, and on-site EPC commissioning.
Zero lost-time injuries with fail-safe interlocked test chambers and certified high-voltage isolation equipment.
Issuing Authority
IAF Multilateral Recognition Arrangement Accredited Body
Registration ID
00121S3xxxxR0M/3100
Safety Protocol Performance verified
Official Registry Details
Verification Database: IAF CertSearch Global Accreditation Registry
Testing Safety: Interlocked 1,000V Dielectric Test Stations & Thermal Burn-In Rooms
Field Safety Record: Certified Substation and Industrial Commissioning Crews
Authentic Audit Scope Transparency
iKonMac maintains authentic, verifiable documentation. EPC contractors and specifying engineers can validate certificate numbers and production scope details directly through official registries. Accredited by CNAS • Registered with IAF. Product references: silicon carbide power electronics and high-voltage SVG.
European Market Regulatory Compliance
CE Marking & European Electrical Safety Compliance
Eliminate cross-border regulatory risks across European and global project tenders. iKonMac industrial power quality equipment is rigorously engineered to comply with mandatory EU Directives, ensuring seamless customs clearance, switchgear assembly safety, and reliable grid interconnection.
LVD
Low Voltage Directive (2014/35/EU)
Supports complete electrical, mechanical, and thermal safety under demanding continuous-duty industrial operating environments.
- EN 62477-1: Safety standards for power electronic converter systems, defining creepage, clearance, and short-circuit withstand integrity.
- EN 60439-1 / EN 61439-1: Factory-built low-voltage switchgear and controlgear assembly safety, structural endurance, and temperature-rise limits.
EMC
Electromagnetic Compatibility (2014/30/EU)
Supports robust operation in severe electromagnetic noise environments while preventing high-frequency interference with plant SCADA and process automation.
- EN 61000-6-2: Heavy industrial immunity against high-voltage surges, fast electrical transients (EFT), and electrostatic discharge (ESD).
- EN 61000-6-4: Industrial emission mitigation, restricting conducted and radiated RF noise to protect neighboring electrical networks.
Engineering Rigor & Built-In EMC Design
Led by more than 50 PhDs, master's degree holders, and veteran power electronics engineers, iKonMac's engineering division applies advanced multi-level topology modeling and hardware shielding to surpass demanding European EMC criteria in harsh industrial installations. Related: static var compensator.
CE Certified
CE-LVD & CE-EMC Certified Active Harmonic Filter
Each active harmonic filter provides real-time dynamic harmonic compensation from the 2nd to 50th orders with sub-5ms total response, compliant with European safety directives and grid harmonic compatibility requirements.
Safety Directives: LVD 2014/35/EU
EMC Industrial Immunity: EN 61000-6-2/4
CE Certified
LVD Directive Compliant SVG
Our advanced static var compensator solutions are engineered for stepless bidirectional reactive power regulation and three-phase load balancing, certified for reinforced electrical insulation and sustained resilience against network voltage sags.
Enclosure Safety: IEC 61439-1
Thermal Reliability: Continuous duty
CE Certified
Grid Interconnection Approved High Voltage SVG
The utility-grade high voltage SVG is engineered for medium- and high-voltage grid substations, featuring validated insulation coordination, lightning impulse withstand capability, and integrated overvoltage protection for utility dispatch.
Dielectric Withstand: Validated
Utility Compliance: Grid access ready
CE Certified
Ultra-Low EMC Radiation Certified
Purpose-built for semiconductor cleanrooms, metrology labs, and hyperscale data centers, delivering near-zero radiated emissions under EN 61000-6-4 and SEMI F47 voltage sag ride-through compliance.
Radiation Profile: EN 61000-6-4
Environment Type: Cleanroom / Fab
CE Certified
Next-Gen WBG Safety Certified
Certified safety and electrical compliance for high-switching-frequency wide-bandgap SiC power modules, delivering greater than 98.5% conversion efficiency with controlled dv/dt stress and minimal thermal losses.
Thermal Management: Controlled dv/dt
Efficiency Rating: >98.5%
Official EU Declaration of Conformity
LVD 2014/35/EUEMC 2014/30/EUEN 62477-1EN 61000-6-2/4
Every manufactured unit ships with full factory acceptance testing (FAT) records, CE declarations, and accredited laboratory test documentation.
Empirical Verification & Laboratory Compliance
Authoritative Third-Party Type Test Reports & Performance Proof
Beyond routine factory self-inspections, every core iKonMac active harmonic filter and static var compensator is submitted to accredited national electric power research institutes and high-voltage testing laboratories (CNAS/CMA certified). These statutory evaluations substantiate our comprehensive Harmonic Filter Type Test Report portfolio, Third Party Certified SVG Testing protocols, and full IEC 61000 Harmonic Filter Test Verification documentation for mission-critical installations.
Complete certified reports with official laboratory stamps, calibrated oscilloscope waveforms, and thermal profiling logs. Turnkey submittal packages aligned directly with international EPC specifications and utility grid code reviews.
Official Laboratory Test Matrix & Certified Parameters
CMA / CNAS Verified| Test Item & Scope | Governing Standard | Empirical Measured Performance | Verification |
|---|---|---|---|
| Harmonic Mitigation Rate & Compensation Capacity | IEEE 519 / IEC 61000-3-4 | Full-range THDi reduction exceeds 97%, with selective, independent mitigation of individual harmonic orders from the 2nd through 50th. | Pass |
| Dynamic Response Time | State Grid / Power Electronic Standards | Total closed-loop response time below 5 ms, with transient step response under 100 μs for rapid dynamic load tracking. | Pass |
| Temperature Rise & Continuous Full-Load Withstand | IEC 60146 / EN 62477-1 | Sustained 72-hour operation at 100% rated current within a 50°C ambient test cell; measured thermal rise remained well below critical insulation limits. | Pass |
| Short-Circuit Withstand Capability & Protection | IEC 62477-1 / IEEE C37.90 | Sub-millisecond IGBT desaturation and hardware overcurrent trip protection; power stage withstands rated short-circuit faults without component breakdown. | Pass |
| Dielectric Strength & Impulse Voltage Test | IEC 60146-1-1 / GB/T 3859.1 | Main circuit-to-ground power frequency withstand of 2.5 kV for 1 minute without breakdown or flashover; medium-voltage components fully meet lightning impulse withstand thresholds. | Pass |
Type Test Document Inspection
All official test reports fully support general contractors and EPC firms during vendor qualification, technical submittals, and final commissioning audits for mission-critical low-voltage and utility high-voltage SVG installations. Complete scanned copies bearing authenticated CNAS and CMA verification stamps are readily issued upon request.
EPC Submittal & Project Handover Support
Drawing on three decades of specialized power quality innovation, iKonMac systems undergo rigorous validation by national power electronic testing authorities under severe operating stress, earning the long-term trust of more than 3,000 industrial and engineering partners across 50+ countries.
Compliance & Quality Verification
Product Family Certification & Standard Traceability
The table below maps international and industry certification credentials held by all core iKonMac products; inspect verified compliance standards across critical electrical engineering topologies.
As an enterprise with vertical R&D and complete manufacturing capabilities, iKonMac works so that equipment delivered to semiconductor fabs, steel mills, data centers, and photovoltaic plants is backed by traceable compliance qualifications. Browse all products.
Harmonic Standard
Grid Interconnection
Semiconductor Standard
| Product Family | Applicable Certifications | Standard Codes | Audit Dossier |
|---|---|---|---|
| Active Harmonic Filter Modular & Wall-Mounted Series | ISO 9001; ISO 14001; CE (LVD+EMC); IEEE 519 Compliance; Type Test CNAS Test Report | IEC 62477-1; EN 61000-6-4; IEEE 519-2022 | PDF Ready |
| Static Var Compensator / Static Var Generator Low-Voltage Industrial SVG | ISO 9001; CE Certification; Low-Voltage Switchgear Assembly Type Test; Dynamic Reactive Power Response Certificate | IEC 61439-1; IEC 60831; EN 61000-6-2 | PDF Ready |
| High Voltage SVG Transmission & Substation Utility Grade | ISO 9001; High Voltage Grid Interconnection Report; Lightning Impulse & Dielectric Safety Report; Grid Access Permit | IEC 62927; GB/T 30873; IEEE 1547 (Grid Interconnection) | PDF Ready |
| Ultra Active Harmonic Filter Precision Fab & Cleanroom Grade | ISO 9001; Low-Noise Specialty EMC Certification; Cleanroom Power Quality Assessment; SEMI F47 Voltage Sag Compliance | SEMI F47 Certified; IEC 61000-4-34 | PDF Ready |
| Silicon Carbide Power Electronics Wide-Bandgap Next-Gen Topologies | ISO 9001; High-Density CE Safety Certification; Ultra-Low Loss Efficiency Attestation | IEC 62477-2; EU Green Energy Efficiency | PDF Ready |
Looking for EPC Tender Qualifications or Type Test Packs?
All third-party lab test reports and factory acceptance test (FAT) documentation can be requested directly for overseas project tenders and engineering reviews.
Utility Interconnection & Critical Industry Mandates
Global Grid Code Compliance & Industry Application Standards
Beyond baseline certifications, iKonMac products fulfill rigid utility interconnection rules across 50+ countries. Our engineering teams deliver verified simulation models and compliance documentation to de-risk grid integration for EPC contractors and industrial operators worldwide.
Core Verification
IEEE 519-2022
Harmonic Control at PCC
Meets stringent Point of Common Coupling (PCC) voltage distortion and Total Demand Distortion (TDD) thresholds across all SCR ratios and fluctuating non-linear loads with advanced active harmonic filter mitigation.
IEEE 519 2022 Harmonic Filter Compliance
Data Centers & Petrochemical Facilities
Core Verification
IEC 61000 Series
Electromagnetic Immunity
Satisfies IEC 61000-2-4 Class 3 compatibility for heavy industrial environments alongside IEC 61000-4-30 Class A precision measurement and surge tolerance.
IEC 61000-4-30 Class A Instrumentation
Heavy Industrial & Manufacturing
Core Verification
SEMI F47
Voltage Sag Ride-Through
Engineered for high-precision wafer fabrication and automated cleanrooms, maintaining non-stop operation through deep momentary voltage sags and line dips.
SEMI F47 Power Quality Equipment
Semiconductor Cleanrooms
Core Verification
Grid Interconnection
LVRT / HVRT & Resonance Control
Features dynamic Low-Voltage Ride-Through, High-Voltage Ride-Through, and broadband damping algorithms within our high-voltage SVG systems to satisfy utility intertie inspection mandates.
Grid Code Compliant SVG for Solar Substation
Solar, Wind & Storage Substations
Core Verification
Global Support
Global Interconnection Support & Pre-Commissioning Verification
iKonMac provides project-specific PSCAD and PSS/E dynamic simulation models, empowering EPC partners and consulting engineers to clear regional utility grid impact assessments without project delays.
50+ Countries Verified Grid Codes · 100% Acceptance Utility Inspection Record
Utility Interconnection & Critical Industry Mandates
Engineering Verification
Frequently Asked Questions on Certifications & Compliance
Clear technical documentation, accredited type test data, and verified credentials are critical for seamless engineering approvals. Drawing on three decades of power electronics manufacturing, iKonMac has assisted over 3,000 partners worldwide in smoothly clearing pre-commissioning technical audits on critical electrical infrastructure projects.
Global Verification
3,000+ Completed Technical Audits
Every technical submittal package includes authenticated third-party test reports, accredited ISO certifications, and factory acceptance records structured for prompt EPC tender approval. Our engineering compliance desk prepares stamped drawing sets, FAT protocols, and grid interconnection dossiers within 24 business hours.
Need Project-Specific Submittal Files?
Email sales@ikonmacglobal.com or request via the dossier form below.
Direct Tender & Engineering Compliance Desk
Request Official Certificate Copies & Project Technical Submittals
Preparing an international EPC tender or utility grid submittal? Request verified, unwatermarked type test reports, CE declarations, and complete ISO documentation packages directly from our compliance engineers for advanced active harmonic filter installations and grid-tied systems.
24-Hour Dossier Dispatch
Receive high-resolution PDF certificates, CNAS lab reports, and official registry verification links within one business day across our utility-grade high voltage SVG and power quality ranges.
Mutual NDA & Bid Protection
We readily execute formal Non-Disclosure Agreements and issue project authorization letters to protect your bid exclusivity.
Direct Verification & Technical Support
Shanghai iKonMac Technology Co., Ltd. • No. 508 Chuanhong Road, Pudong New Area, Shanghai. Delivering certified, utility-grade power quality equipment with global lifecycle support.
Compliance Desk Emailsales@ikonmacglobal.com
Direct Line / WhatsApp+86 176-2152-9866
Global HeadquartersBuilding 1, East Area, 1F, No. 508 Chuanhong Road, Pudong New Area, Shanghai, China
Technical Dossier Request
Specify your target equipment and required documentation for rapid transmission.
Submittal Request Confirmed workflow: our application engineering team will transmit your verified PDF technical dossier and certificate registry credentials within 24 hours.